Sabrent sent us this charger, and while we do not generally review USB chargers, we thought we would take a few photos and share it since it has been pretty useful. The Voltik 252W 8-port USB PD 3.0 Charger is a desktop charging station with four USB-C ports and four USB-A ports, and Sabrent rates it at 252W of total output. That is a lot of power for something that sits on a desk, and the port layout is what makes it worth a closer look.
Here is the unit via an Amazon Affiliate link.
Sabrent Voltik 252W Hardware Overview
The enclosure is a black rectangular block that is not really what we would want from a travel charger, but it works well on a desk.

The front face has a display at the top, then the four USB-C ports, then the four USB-A ports below them. There is also a button for the LCD.

The USB-C ports are arranged in two rows of two. The upper row is labeled C1A and C1B, and the lower row is labeled C2A and C2B. Sabrent rates each USB-C port at up to 100W, which is enough for a laptop on its own. The 252W figure is the station’s combined output, so the four USB-C ports cannot all deliver 100W at the same time. Sabrent lists support for PD 3.0, PPS, QC 4.0, and QC 3.0.

Below the USB-C ports are the four USB-A ports, also in two rows, with the Sabrent logo underneath. Sabrent rates each USB-A port at up to 18W.

Here is a shot of the LCD lit up and showing eight port boxes labeled C1A, C2A, A1A, and A2A across the top and C1B, C2B, A1B, and A2B across the bottom. The screen can cycle through each port to show current wattage, voltage, amperage, and internal temperature by using the button between ports C1A and C1B. Other chargers do that, but if you do not have something like that yet, then it is something that if you read STH, you will like.

The power-input panel has the AC inlet, a printed rating label that includes the model AX-8PTC and the per-port and shared output modes. It is nice that the unit directly takes AC power rather than through an external power brick.

Of course, if you want to use it on the road, it is pretty easy to find a different input cable for this one.

The rear face has two long raised strips along its edges and two rectangular recesses in the center for a mounting plate.

The mounting plate has four fixing holes and two rectangular hooks, shown here with two black fixings in front and the charger behind. That hardware points to mounting the station rather than leaving it loose on the desktop.
Final Words
The Sabrent Voltik 252W is interesting because it consolidates a desk full of chargers into one unit with eight ports and a display that shows the status of each port’s voltage, current, temperature, and time. It is quite useful to know if something is charging, or if it is on, and how fast. On the other hand, we have seen notebooks that draw over 100W via USB Type-C, so even though this is a huge USB charger, it cannot charge everything.

For a desk with several devices that need to charge, that combination of port count, power, and feedback is the practical case for a single station in place of a drawer full of separate adapters. We now have four of these.
Where to Buy
If you want to buy one of these or check the current pricing, here is an Amazon affiliate link.



