Tenda TEM2010F 8-port 2.5GbE and 2-port SFP Switch Review

1
Tenda TEM2010F Front
Tenda TEM2010F Front

Today, we have a review of the Tenda TEM2010F. This is a 10-port 2.5GbE switch, that we purchased for our 2.5GbE switch round-up months ago, and we were so excited. We thought this was the MaxLinear MxL86282 for 8x 2.5GbE and 2x 10GbE switch that we had been waiting for. It turns out, that this was not and we ended up not getting it into our review. (Yes, we found a switch with that MaxLinear chip, but this is not it.) That said, it is time to give this Tenda its review on STH since it has more than a little “funk” to it.

If you just want a link to where to get the switch, you can find an Amazon affiliate link here. Pricing is wild on this one. We purchased it in April 2024 after there was a discount, dropping the price from $129 to $79. The current (as of writing this) list price in September 2024, when we checked, was $99 with a $30 standard discount and another $10 off promotion. It is currently $79 minus a $20 promotion. That brings the current price to $59. That is a drop of over 50% in less than five months, which brings it more in line with what we would expect for a switch in this class.

Given the price at the time, we did not include this in our testing 21 different 2.5GbE switches video earlier this year.

Instead, we focused on switches where the SFP cages were SFP+ for 10G networking.

Tenda TEM2010F Hardware Overview

The switch itself has eight 2.5GbE ports and two SFP ports that were the ones that faked us out. We have seen models like the Gigaplus GP-S25-0802 8-port 2.5GbE and 2-port 10G switch that have two SFP+ ports if you just need more 10GbE. This is not that. Instead ports 9 and 10 are 2.5G SFP ports.

Tenda TEM2010F Front
Tenda TEM2010F Front

You will notice the toggle switch on the front, we will get to that in a bit.

On the side, we get vents.

Tenda TEM2010F Side 1
Tenda TEM2010F Side 1

On the other side, we get a vent that looks like it is for a fan, but there is not a fan installed.

Tenda TEM2010F Side 2
Tenda TEM2010F Side 2

At this point, the specs are a bit hard to find on this one. Here is the box bottom that says this is a 50Gbps switching capacity switch with features like 6kW lightning protection. The best is that there is a diagram on the box that has a legend that shows Power and Data connections and shows that you put the power adapter into the switch, but then there are data connections to other devices, but only five devices. It feels like what happens if you need to fill up some box space and want to have a diagram.

Tenda TEM2010F Box Rear
Tenda TEM2010F Box Rear

On the bottom, we get mounting points for wall mounting. Instead of rubber feet, we get metal feet.

Tenda TEM2010F Bottom
Tenda TEM2010F Bottom

Opening the switch, we can see a giant heatsink.

Tenda TEM2010F Top Open
Tenda TEM2010F Top Open

We tried removing this heatsink, but it was not held on by screws or clips. Instead, it was soldered onto the switch PCB. Since we still needed to run this through its normal testing routine, it seemed like the wrong option to destroy this cooling solution which was a big bummer.

Tenda TEM2010F Internal Big Heatsink
Tenda TEM2010F Internal Big Heatsink

Next, let us get to management, performance, and power consumption.

1 COMMENT

  1. 2.5G SFP is very odd choice. Interestingly on their official website unmanaged switch page, the name is just “8-Port 2.5G Ethernet Switch”, without mentioning of the SFP ports until you open the product page. Meanwhile they do have TEM2010X which comes with two 10G SFP ports. The chassis is slightly different so it’s not like they are reusing the shell. I wonder if TEM2010F was just a failed design of TEM2010X and they are trying to recoup some loss.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.